TRUSTED BY:
Arnold A.F.B.
Argonne National Labs
Boeing
CTA Space Systems
European Space Agency
J.P.L./Hughes
U.C. Santa Cruz, Lick Observatory
Los Alamos National Labs
Optical Coating Labs
NASA/Langley AFB
Smithsonian Observatory
Space Industries
U.C. Berkeley Space Sciences Lab
Stanford Linear Accelerator
Ontario Hydro, Canada
Tokai Works, Japan
Taiwan Nuclear Power Commission
Public Nuclear Commission, Japan
Materiel
Brookhaven National Labs
General Electric Nuclear Fuels Div.
Martin Marietta/Oak Ridge National Lab
Stepper Motors
Wiring Diagram for Frame 42 Waterproof (-WP)
Specifications
| Standard Configuration is 8 Individual Lead Wires Minimum 12 inches in Length | ||
| Motor model | Wire size | Wire diameter (Inches) |
| U41 | 16 | 0.0545 |
| U42 | 16 | 0.0545 |
| U43 | 16 | 0.0545 |
| Cable information: Cable is installed inside the motor housing, with strain relief and shield connected to the metal of the motor. | ||
| Empire Magnetics Part number 00-0510-0055 four conductors of 16 AWG, with overall shield and jacket, nominal cable OD .416 inches, minimum bend radius 2.7 inches. Tinned copper, paper wrap, rubber insulated conductors, Rayon braid tinned copper braid shield, 85% shield coverage. 600 volt Neoprene jacket. |
Frequently Asked Questions (FAQ)
About Waterproof Installations
Part Number Configurator
Select a Model with all Available Options
Government Projects & Defense Applications
Empire Magnetics has been awarded and completed US Navy contracts in excess of $100,000 as a prime contractor. The Cage code number assigned was OYMU1, CEC code 19665900H. As a subcontractor to RSI/Comsat, SAIC, Lockheed Martin, Westinghouse, General Electric and other prime contractors for the US Government, contracts in excess of $200,000 have been awarded and completed.
Nationwide & International Distributors for Specialty Motors & Complete Motor System Solutions
Empire Magnetics products are distributed by a nationwide and international network of motion control sales professionals. Your local distributor carries the drives and controls, and the accessories needed to build a complete motion control system.