Standard Configuration is 8 Individual Lead Wires
Minimum 12 inches in Length |
| Motor model | Wire size | Wire diameter (Inches) |
| U31 | 20 | 0.0351 |
| U32 | 20 | 0.0351 |
| U33 | 20 | 0.0351 |
| Cable information: Cable is installed inside the motor housing, with strain relief and shield connected to the metal of the motor. |
| Empire Magnetics Part number 00-0510-0010 four conductors of 20 AWG, with overall shield and jacket, nominal cable OD .294 inches, minimum bend radius 1.5 inches. Tinned copper, cotton wrap, rubber insulated, Rayon braid, tinned copper braid shield, 85% shield coverage, cotton wrap, 600 volt, EPDM rubber jacket. |
|
Go Back