Wiring Diagram 1(2.6 KB)   Wiring Diagram 2(1.8 KB)
Standard Configuration is 8 Individual Lead Wires
Minimum 12 inches in Length
Motor modelWire sizeWire diameter (Inches)
Cable information: Cable is installed inside the motor housing, with strain relief and shield connected to the metal of the motor. Motor has a 1/2 NPT threaded hole in the casting, cable fitting is provided when optional cables are ordered.
Empire Magnetics Part number 00-0510-0051 eight conductors of 18 AWG, with overall shield and jacket, nominal cable OD .33 inches, minimum bend radius 1.7 inches. Tinned copper, PVC insulation, Aluminum polyester foil shield, with stranded drain wire, 300 Volt PVC jacket.

View wiring / plumbing arrangement