Extended Temperature (-HT) Brushless Motors R60 Series
(Motor models : R63, R65, R67)

Wiring Diagram (5.5 KB)
CableWire sizeConductor diameter (Inches)
MotorAWG 120.0847
ResolverAWG 220.0281
Temperature SensorAWG 260.0182
Cable information:  Motors are supplied with 24 inch cables on the motors (510-0042), Resolvers (510-0054), Temperature sensors (510-0004) open ended cable or flying leads.
NOTE:  There is a motor cable, a resolver cable, and a temperature sensor cable for each motor.
Empire Magnetics
Part number
(Motor cable)
Four conductors of 12 AWG, nominal cable OD .429 inches, Tinned copper, Teflon insulated, conductors cabled. Foil aluminum-polyester, shield with 85% tinned copper braid shield. Teflon jacket, Red tint. 300V.NEC 760. Listed for use in an air plenum nonconduit.
(Resolver cable)
Six conductors of 22 AWG, nominal cable OD .226 inches, Tinned copper, twisted pair. Each pair individually shielded with foil aluminum-polyester shield. Pairs cabled on common axis to reduce diameter. 300V RMS.
(Temperature Sensor cable)
Two conductors of 26 AWG, nominal cable OD .120 inches, Stranded silver-coated copper conductors, insulated with extruded TFE Teflon. Color-coded, cabled, silver-plated copper braid shield. White TFE Teflon tape-wrapped jacket. MIL-SPEC: MIL-W-16878/4(Type E). Temperature rating: -65° C to 200° C. Voltage: 600V.